Guanya Environmental

Guanya Environmental

Slide Heading
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Click Here

Containerized Industrial RO Systems – Oil & Gas, Power Plants, Industrial Facilities

1. Custom-Engineered for Your Site Conditions

We design each system based on your specific feed water quality, capacity requirements, and operating environment — not a standard off-the-shelf configuration. Our team has engineered systems for TDS levels exceeding 15,000 mg/L, sites at 3,800m altitude requiring full pump derating, and installations with limited footprint constraints.

2. Complete Factory-Built & Tested System

Fully assembled, pre-piped, pre-wired, and 72-hour factory-tested before shipment. You receive a complete system, not a container of parts. We send you video verification of the system running with water before we ship — you see it working before it leaves our factory.

3. 48-Hour Deployment – Zero Civil Works

Arrives on site and produces water within 48 hours. No concrete foundations, no permanent buildings, no complex installation — just level ground and utility connections. When your project moves, the entire system can be relocated within 1–2 days.

4. Built for 50°C+ & High-TDS Environments

Engineered specifically for extreme heat, sandstorms, and high-salinity groundwater — not repurposed standard equipment. 55°C peak design, IP54-rated sand protection, 316L stainless steel piping, and marine-grade corrosion resistance for Gulf and desert conditions.

5. Solar-Ready with Full Support Package

Solar PV integration reduces fuel costs and carbon footprint in off-grid locations. Every system includes a complete spare parts kit, operation manual, startup support, and operator training — everything needed for years of reliable operation in remote industrial sites.

Chat Now
Message
Email

Product Details

Product Details

The Industrial Water Challenge – We Understand Your Operating Environment

When ambient temperatures hit 50°C, sandstorms reduce visibility, and the nearest service center is 300 km away – standard water treatment equipment fails.

Our engineering team has extensive experience in oil & gas, power generation, and mining applications across the Gulf region. We understand the specific challenges you face because we have designed systems for them.

Challenge What We’ve Seen in the Field Our Engineering Response
Extreme Heat Standard RO systems overheat and shut down when ambient temperatures exceed 45°C – we’ve received calls from operators whose European-made equipment failed mid-summer 55°C peak design; oversized cooling systems; high-temperature-rated electrical components
High-TDS Groundwater Oilfield feed water TDS often exceeds 8,000–10,000 mg/L – we’ve treated water from wells across multiple Gulf oilfields with varying salinity levels Customized membrane array design for each site; anti-scalant dosing; higher-pressure pump options for challenging feed water
Sand & Dust Sandstorms cause filter clogging and abrasion damage to unprotected equipment – we’ve seen systems fail within weeks where sand ingress wasn’t considered in the design IP54-rated control cabinets; sand filters on all ventilation intakes; self-cleaning pre-filtration; abrasion-resistant components
Remote Operations Sites often lack technical staff – we’ve worked with operators managing multiple sites with minimal personnel on each location Fully automatic PLC + HMI control; remote monitoring capability; designed for unattended operation with simple operator checks
Power Supply Grid power may be unavailable or unstable – our team has configured systems for sites where the only power source is a generator, with 30% derating for high-altitude locations (up to 3,800m) Solar-ready design; diesel or grid compatible; hybrid power configurations available

Why this matters to you: We don’t just sell equipment. Our team can design a system for your specific site conditions – we’ve already solved the problems you’re about to face. This is the difference between a supplier and a partner.

If you are considering an RO unit, contact us for an economical water treatment solution today

Our Solutions – Containerized Industrial RO for Oil, Gas, Power & Mining

Complete high-purity water systems in a standard ISO container. Factory-built. Pre-tested. Arrives ready to operate.

Application Water Quality Required Typical Use
Boiler Feedwater Ultra-pure / Demineralized (≤0.1 µS/cm) Steam generation in power plants and refineries
Cooling Tower Makeup Low conductivity, low hardness Evaporative cooling systems in power plants
Process Water Varies by process Refining, petrochemical, chemical manufacturing
Utility Water Potable or industrial grade Drinking water, equipment cleaning, general use
Ultra-Pure Water Resistivity > 18 MΩ·cm High-pressure boiler feed, turbine cooling

Our systems are built for flexibility. We don’t offer a single standard configuration – we engineer each system to match your feed water analysis, capacity requirements, and site conditions.

Parameter Specification Range
Feed Water Brackish groundwater (TDS up to 10,000 mg/L), seawater (TDS 35,000+ mg/L), or municipal supply
Customized Output ≤0.1 µS/cm for demineralized water; potable standard; or custom target – we design to your requirement
Capacity Range 20–1,000+ m³/day (scalable with multiple units)
Recovery Rate 60–75% for BWRO, 35–45% for SWRO (site-optimized)
Power Source Grid, diesel, or solar hybrid – solar-ready design

Technical Expertise – Custom Engineering for Every Site

High-TDS water is not all the same. Neither are our systems.

Our engineering team designs each system based on your site-specific conditions. We don’t offer “one size fits all” – we offer “fits exactly your needs.”

What We Customize for Your Site

Customization Area What We Evaluate Our Engineering Response
Feed Water Quality TDS level, hardness, silica, iron, manganese, and other contaminants Membrane selection (standard/high rejection/ultra-low energy), pre-treatment design, chemical dosing plan
Capacity Requirement Peak vs average demand, future expansion plans System sizing, multiple unit configurations, modular expansion capability
Site Power Availability Grid connection, generator capacity, solar potential Pump selection, power distribution, solar hybrid integration
Ambient Conditions Temperature range, humidity, dust load, altitude Cooling system design (air/water), component derating, insulation requirements
Space Constraints Available footprint, container placement options Single/multiple container configuration, vertical integration
Operator Capability Technical skill level, availability of maintenance personnel Automation level, remote access setup, training package design

Our team has designed systems for sites where feed water TDS exceeded 15,000 mg/L in mountain mining projects, where available space measured exactly one 40ft container footprint, and where site elevation at 3,800m required full pump derating to achieve the required flow. If you have a site, we have likely solved the problems you have there.

The Guanya Manufacturing Advantage

We are a true manufacturer – not an assembler or trading company.

Our team handles engineering design, fabrication, assembly, and testing in our own facility. You are buying directly from the factory that controls every step of the process.

From Engineering Design to Factory Testing – All Under One Roof

Stage What We Do
Engineering Design 3D modeling, pipe stress analysis, electrical schematics, PLC logic programming – all tailored to your site conditions
Equipment Fabrication Skid welding, membrane loading, pump assembly, high-pressure pipe prefabrication
System Integration Pipeline connection, valve installation, electrical assembly, control panel wiring
Factory Testing 72-hour wet commissioning – we test your system with water before it ships

What You Get

  • ✅ A complete system – not a kit of parts

  • ✅ Fully pre-assembled in a standard ISO container

  • ✅ Pre-piped, pre-wired, and ready to connect

  • ✅ Customized to your site’s water quality and conditions

  • ✅ Factory tested with video verification – you see it working before we ship

  • ✅ Arrives on site – connect, start, and produce water within 48 hours

Factory-Direct Pricing: 30%–40% cost savings compared with European or North American suppliers – without compromising on design or manufacturing standards.

What's Included – We Set You Up for Success

We don’t just ship you a container. We ship you a complete operational system with everything needed for years of reliable operation.

Standard Package Includes

Component What’s Included
Main System Complete RO skid with membranes, high-pressure pump, pre-treatment, post-treatment, and control system
Complete Spare Parts Kit Replacement seals, O-rings, filters, cartridges, and critical wear components – we pre-select parts based on your site’s expected maintenance schedule
Operation & Maintenance Manual Comprehensive documentation in English (or Arabic upon request) covering daily operation, maintenance schedules, troubleshooting, and component replacement procedures
Startup & Commissioning Support Remote video guidance for first startup; option to have our engineer on-site for commissioning (available upon request)
Operator Training Remote training sessions covering system operation, monitoring, routine maintenance, and troubleshooting

We ensure your team can run and maintain the system from day one. Our documentation includes step-by-step instructions and quick-reference guides for common operations (startup/shutdown sequence, filter replacement, membrane flushing).

Optional Services (Available Upon Request

Service Description
On-Site Commissioning Our engineer travels to your site for first startup and operator training
Customized Arabic Documentation Operation manuals and training materials in Arabic
Extended Spare Parts Package Additional consumables and wear parts for extended remote operation
Remote Monitoring Setup SCADA integration for real-time performance monitoring from your central control room

One-Stop Service: From Design to Manufacturing, Full Process Support

Built for 50°C+ Environments – Field-Proven Design

Standard equipment fails in extreme heat. Ours is engineered for the 99th percentile – so it survives every day of the year.

Environmental Factor Conditions Our Engineering Response
Ambient Temperature 50°C dry, 35°C wet (coastal) – 52°C dry (inland) 55°C peak design; oversized cooling; high-temperature-rated components; 316L stainless steel piping for corrosion resistance
Solar Irradiance Approaches 1,100 W/m² Solar-ready design – PV integration available
Sand & Dust (Normal) 200–1,000 µg/m³ IP54-rated control cabinets; sand filters on ventilation
Sand & Dust (Storm) 5,000–30,000 µg/m³ Heavy-duty pre-filtration; self-cleaning filter systems
Relative Humidity 60–90% (coastal) Marine-grade coatings; corrosion-resistant materials
High TDS Feed Water 8,000–15,000+ mg/L High-pressure membranes; anti-scalant dosing; customized membrane array design
Grid Distance Often 100+ km from substation Solar hybrid or diesel-ready – operational independence

Solar-Ready – Reduce Operating Costs in the Gulf

The Gulf has some of the world’s best solar irradiance – up to 1,100 W/m². Our systems are designed to use it.

  • Solar PV ready – All systems are designed for solar integration, reducing diesel consumption and operating costs

  • Hybrid operation – Grid, diesel, or solar power – automatically switch between sources

  • 24/7 operation – With battery storage or diesel backup for continuous operation through the night

  • Lower carbon footprint – Solar integration reduces emissions and fuel logistics burden

48-Hour Deployment – Critical When Every Day Counts

Step Time Action
1 Day 1 (morning) Container arrives on site via flatbed truck
2 Day 1 Set on level ground – no foundations needed
3 Day 1 Connect intake, power, outlet
4 Day 2 System producing high-purity water within 48 hours

FAQ Section

1. Can you customize the system for our specific site conditions?

Yes – this is a core part of our offering. We design each system based on your specific feed water analysis (TDS, hardness, silica, iron, manganese, and other contaminants), capacity requirement, and site conditions. We don’t offer one-size-fits-all – we engineer systems that fit exactly your site’s needs. Our team has custom-engineered systems for sites with TDS exceeding 15,000 mg/L, for mines at 3,800m altitude requiring full pump derating, and for installations with limited footprint constraints.

2. What is the delivery timeline from order to shipment?

35–45 days from design confirmation to shipment – significantly faster than traditional suppliers, without compromising on engineering quality or factory testing.

3. How long from delivery to operation?

Within 48 hours. The system arrives fully assembled and tested. Connect feed water, power, and outlet – water production begins. No on-site construction, no complex installation.

4. Can the system run on solar power?

Yes. All our systems are solar-ready. We offer solar-diesel hybrid configurations – particularly valuable in remote locations where grid power is unavailable or where reducing fuel consumption is a priority.

5. What maintenance is required and how are spares supplied?

Our systems are designed for remote operations with minimal technical support:

  • Pre-filters: check/replace every 1–3 months (site-dependent)

  • RO membranes: replace every 3–5 years

  • Complete spare parts kit included with every system – we pre-select components based on your site’s expected maintenance schedule so you have everything needed from day one

6. Can the system be relocated?

Yes. The containerized design means the entire system can be disconnected, loaded onto a truck, and moved to another site – usually within 1–2 days. This makes it an asset that retains value across multiple projects. We have designed systems specifically for operators who relocate equipment as projects move.

7. How does Guanya compare with European brands?

You get the same containerized plant-in-a-box design and rapid deployment capability as international competitors, but with factory-direct pricing that saves 30%–40%. As a true manufacturer with full in-house engineering and production, we deliver equivalent quality without the brand markup – and we can customize to site conditions that European brands often won’t accommodate.

8. What about after-sales support for remote sites?

We provide:

  • Complete operation and maintenance manual with the system

  • Complete spare parts kit – pre-selected for your system

  • Remote video troubleshooting via video call

  • On-site commissioning support available upon request

  • SCADA integration for remote monitoring – when configured, our team can review system performance data to identify issues before they cause downtime

9. What water quality can you achieve?

We design to your target water quality. Common targets include:

  • Potable water: <500 ppm TDS (WHO standard)

  • Industrial process water: 50–200 ppm TDS (industry-dependent)

  • Demineralized water: <0.1 µS/cm conductivity

  • Ultra-pure water: >18 MΩ·cm resistivity

  • Cooling tower makeup: Low conductivity and hardness, site-optimized

10. Do you have experience with high-TDS feed water?

Yes. Our engineering team has designed systems for feed water TDS exceeding 15,000 mg/L in mining and oilfield applications. We evaluate each site’s water analysis and design the membrane array, pre-treatment, and post-treatment accordingly – including higher-pressure pump configurations and specialized anti-scalant dosing where required.

Request Your Industrial RO System Proposal

We will provide a preliminary system design and cost estimate within 24 hours.

Please share:

  • Application (oil & gas / power plant / mining / industrial / other)

  • Feed water source (seawater / brackish / municipal) and TDS (if known)

  • Required water quality (potable / demineralized / ultra-pure / custom)

  • Required capacity (m³/day)

  • Power available (grid / diesel / solar)

  • Site location and timeline

Contact Us Anytime

Contact Us Anytime

Send Us a message